Product Description:
·6061-T6 Aluminium alloy fully CNC machined, suitable for all TAROT450 retrofit DFC rotor heads
·Ultra-low centre of gravity and short spindle design with rotor level close to the fuselage centre of gravity
·This improvement improves the sharpness of 3D movements such as tumbling, spin flips and pendulums
·Enables electric helicopters to hover more horizontally and with greater appreciation
·Newly designed large format bearing clamps with central thrust bearing
·Indirectly extends the lateral swing arm of the bearing to reduce false oscillation
·Large size bearings can withstand stronger pulling forces to meet the current requirements of mainstream models for high power
·New anti-shot cross shaft with integral tensile design in 480 gauge
·Locking of the cross shaft with grade 12.9 M2.5 diameter fully threaded screw
·This design effectively reduces the probability of shooting the paddle
·Effective thread depth of up to 8 mm in the bore of the cross shaft to avoid impact stress points
·The new DFC has a narrower 3.5 mm centre section in the anti-radiation cross shaft
·Corresponding impact damage to the main rotor mount
Product Features:
·The 450DFC main rotor mount has an extension arm [TL48012] of a perishable design, which significantly reduces the cost of use.
·Large paddle clamp stop-slip nut with nut limit hole
·Easy to use as no spanner is required for locking
·Ergonomic design added to the top of the main rotor clamp
·Adjust the level of the main rotor clamp with the scale to facilitate pitch adjustment to 0 degrees
·The new DFC main rotor mount has a hollow design and weighs only 5.6g
·The hollow design and the M2.5 bushings screws allow for a tight fit between the main rotor holder and the spindle.
·Improves 3D precision flight performance of the entire rotor head set
·The new DFC main rotor mount has a minimalist profile
·V-shaped frame provides a strong support structure and significantly reduces component vulnerability
·The new DFC main rotor mount has a fully enclosed bottom to prevent cracking in case of impact
·New DFC main rotor mount with additional ergonomic design on top
·Adjust the level of the main rotor clamp with the scale to facilitate pitch adjustment to 0 degrees
·The DFC cross shaft washer is made of 85° super hard rubber in one piece and the outer diameter of the washer is increased to 7mm
·This improvement makes full use of the swing hinge function to compensate for the uneven lift from left to right of the main rotor
·Reduces main rotor blade fatigue and enhances smooth flight performance
·DFC spindle with ultra-low centre of gravity and short spindle design, new enhanced linkage structure eliminates SF control arm
·The connecting rod supports are made of stainless steel, giving the rotor head a more appreciative appearance
·Applicable Specification No.: 450 PRO FL Main Rotor Holder Set TL45118
·The large size of the cross shaft washer is designed to support the inner ring of the bearing more effectively.
·Thrust bearing installation need to pay attention to, IN outside diameter of the large retaining ring first installed close to the central joint position, so as to effectively smooth the transmission of tension
·The concave face of the steel ball brass of the thrust bearing is directed inwards to prevent the oil from being thrown out
Related items:
Tarot 450 DFC Main Rotor Hub TL45163A
450 DFC Main Rotor Hub /Black TL45163B
Tarot 450 DFC Main Grips TL48011-B
Tarot 450 DFC New Feathering Shaft TL48009
Tarot 450 DFC main rotor rod group TL45165-01
Tarot 450 DFC Main Shaft Screws TL45167-02
Tarot 450 DFC One-piece Damper TL45167-01
Tarot 450 DFC Main Shaft TL45166
Tarot 450、500 DFC Ball Link TL50186
Product Specifications:
450 DFC Main rotor mount set/Silver×1
450 DFC Main shaft(108mm)×1
450 DFC cross shaft washer(Φ4*Φ7*4.0mm)×2
450 DFC Main shaft locking bushing screw(M2.5*10.5mm)×1
