Product Description·Tarot Factory Large Load Electronic Thrower Series - TL2965/20KG Insurance Version;
·A new insurance mechanism has been added to the original TL2962/20KG electronic thrower;
·Greatly avoids the risk of mistakenly touching the throws;
·Trigger the PWM signal to unlock the safety command before throwing (within 1 second) and then trigger the throw command immediately to execute the throwing function;
·After 1S then timeout re-enters the insurance state;
·This product is made of 6063 aviation aluminum and 304 stainless steel assembled by CNC machining;
·The structure adopts the design principle of mechanical lever, which can reduce the output power required by the drive mechanism;
·Compact size of the throwing device and the articulated structure of the lever does not jam due to the weight of the load;
·You can mount more than one electronic thrower of this series according to the environment of the use scenario, and you can independently control the sequence of each thrower.
Product Parameters:Operating Voltage: DC5-12V
Product Size: 82*51*18mm
Weight: 103g
Power Wastage: Standby: 0.2W (5V 0.04A), Throw: 3.7W (5V 0.74A)
Mounting Position: 11mm * 75mm (M3 * 10-4)
Control Method: PWM
Wiring Method: 3P Dupont head/wire length 150mm
Product operating instructions and LED status light description:Note: This product uses standard PWM remote servo signals (1000-2000us) to resolve
1：If the thrower is not currently detecting PWM signal access, the red LED flashes；
2：Thrower initial power-up, if the detected PWM signal is not initially in the 1400~1699us interval, the LED blue light flashes; the PWM signal will be placed in this interval, it will enter the standby mode of normal operation, the LED red light is normal bright；
3：The PWM signal will be placed in the interval of 1700~2000us, at this time, the insurance mechanism is unlocked, the LED red light is off to the LED blue light is always on; insurance lifting time is 1 second, if the timeout is not triggered by the throw command, the insurance mechanism is locked, at this time, the LED blue light is blinking, at this time, the PWM signal will be re-located to 1400~1699us interval, you can cut back to the state before the insurance is locked to re-operate.At this time, put the PWM signal back to 1400~1699us interval, it can be cut back to the state before the insurance is locked to re-operate；
4：Within 1 second after the insurance mechanism is unlocked, the PWM signal is placed in the interval of 1000~1399us, then the throw command is triggered, and the LED blue light is normal bright after the successful throw.
Packing List:Electronic Thrower ×1
Accessory bag ×1
